Jerguson Valves
|
 |
SERIES 140 VALVES |
| Pressure
Ratings: 2400lbs. @ 100ºF | 1400lbs. @ 750ºF. Standard
Features: Integral bonnet valves, steel & stainless
steel bodies are available. Stainless steel
trim with a wide choice of connections. |
| |
| See
Series 140 Page for Details |
| |
 |
SERIES
60 VALVES |
| Pressure
Rating: 4000lbs. @ 100ºF | 1500lbs. @ 750ºF. Standard
steam rating - 600 WSP. Union bonnet
valves, steel & stainless steel bodies are available. Stainless
steel trim is standard with a wide choice of features
and connections. |
| |
| See
Series 60 Page for Details |
| |
 |
SERIES
70BL & 70XL VALVES |
| 600LBS. ANSI Rated. The
70BL & 70XL valves come standard with a wide choice
of features and connections. |
| |
| See Series 70BL & 70XL
Page for Details |
| |
 |
SERIES 70 VALVES STANDARD FEATURES |
| 900LBS. ANSI Rated The
70 series valves come with bolted bonnet OS&Y construction.
Both steel & 316SS bodies are available. Stainless
steel trim is standard with a wide choice of features and
connection. |
| |
| See
Series 70 Valves for Details |
| |
 |
SERIES 90
VALVES STANDARD FEATURES |
| Rated 4000lbs. @ 100ºF
| 1500lbs. @ 750ºF. Jacket 600lbs. W.S.P. Jacketed
valves for use with heated or cooled gages or other services
where small jacketed angle valves are required. |
| |
| See
Series 90 Page for Details |
| |
 |
Series 136 Tubular Valves Standard
Features |
| Offset Integral bonnet and seat and
forged body (Carbon Steel & 316SS). 3/4" screwed
inlet by 3/4" tubular glass by 1/2"drain.
Ballcheck of stainless steel shut-off flow in event
of tube breakage. Stainless steel trim. Offset bodies
permit the swabbing of glass by removing plugs from
vent and drain. |
| |
| See Series 136
Page for Details |
| |
 |
SERIES 56 TUBULAR VALVES STANDARD
FEATURES |
| Offset union bonnet with a renewable seat
and forged body (Carbon Steel & 316SS). 3/4" screwed
inlet by 3/4" tubular glass by 1/2"drain. Ballcheck
of stainless steel shut-off flow in event of tube breakage.
Stainless steel trim. Offset bodies permit the swabbing
of glass by removing plugs from vent and drain. |
| |
| See Series 56 Page
for Details |
| |
 |
SERIES 125 TUBULAR
VALVES STANDARD FEATURES |
| Straight pattern with integral bonnet and
offset-barstock straight pattern-integral bonnet and seat
(Carbon Steel & 316SS), |
| |
| See Series 125 Page
for Details |
| |
 |
SERIES VA / VC TUBULAR VALVES
STANDARD FEATURES |
| Straight through flow design. Brass body
construction. 3/4" or 5/8" Dia. Glass, 1/2" or
3/4" MNPT Vessel Connection. Automatic & Non-Automatic* |
| |
| See Series VA / VC
Page for Details |
| |
| Previous Page |
