Jerguson Isolation Valves Series 60

Pressure Ratings: 4000 lbs. @ 100° F., 1500 lbs. @ 750° F. standard steam rating - 600 WSP

Union bonnet valves, steel bodies with stainless steel trim, wide choice of features and connections (Regrindable, renewable seat)

Jerguson Series 60 Valves are designed and built to the highest standards. Quality features such as stainless steel stems, seats, and ball check, regrindable and renewable seats. A wide selection of optional features permit a high degree of customizing to meet very specific demands.

• No. 63 - straight pattern with female NPT gage conn
• No. 64 - straight pattern with union gage conn
• No. 66 - offset pattern with female NPT gage conn
• No. 67 - offset pattern with union gage conn

Safety shut-off: All No. 60 Series Valves are equipped with a stainless steel ball check located upstream from the seat which instantaneously shuts off flow of medium being gaged in case of gage glass breakage. The ball may be omitted on request.

Union Gage Connection: Nos. 64 and 67 are furnished with a union gage connection which allows a top and bottom connected gage to be turned to any desired angle for convenient visibility. It makes possible removal of the gage without removing the valves - a feature which saves time when gages must be cleaned or maintained.

Offset Pattern: Nos. 66 and 67 valve bodies are designed so the gage and drain connections are offset 7/8" from the centerline of the vessel connections. By removing the plug the interior of a top and bottom connected gage glass may be swabbed without removing the gage.

Convertible to Quick Closing: No. 60 Series Valves may be converted from plain stem to quick-closing stem, in the field, by replacement of sleeve, stem and packing.

Regrindable, Renewable Seat: The seat may be reground using the sleeve as a guide. The seat may be renewed by removing the seat with a standard wrench.

Backseating Stem: When backseating stem is backed out to its limit the knob on the stem seats against the sleeve which protects the packing from the fluid.

Quick Closing: Quick-closing valve stems with levers for chain operation. Exclusive equalizing plate assures positive closing of both valves. Stems have quadruple thread for full closing or opening in € turn.

Bleed Fitting: A bleed fitting is available making it possible to bleed pressure from the valve and connected gage without breaking any threaded connections. The bleed fitting is designed so its stem cannot be withdrawn accidentally. It is tapped for 1/8" N.P.T. discharge. 

Downstream Ball Check: No. 67. An additional safety feature in the bottom valve of a top and bottom connected assembly is an optional ball check on the downstream side of the bottom valve seat. This arrangement shuts off the flow of liquid in case of fracture of the instrument of connecting piping and eliminates the upstream ball in the bottom fitting. A 1/8" male drain is standard. A cap may be furnished on request.