HICORP 6-Way Same-Side Transfer Valve — Continuous Flow — Northeast Controls Inc.
Northeast Controls Inc.

HICORP Transfer Valves

6-Way Configuration

6-Way Same-Side Continuous Flow Transfer Valve

Zero Leakage · Same-Side Porting · API 614 Compliant

Same-Side Porting — Simplified Piping

Inlet and Both Outlets on the Same Side

The 6-Way Same-Side configuration places the common inlet and both equipment-train outlets on the same face of the valve body. This eliminates the need for crossover piping and simplifies installation in tight equipment bays where both filter vessels or coolers are mounted side-by-side.

Like all HICORP valves, the positive mechanical shoe-seal system retracts during changeover — eliminating friction and wear — then locks into place for true zero-leakage shutoff. No spectacle blinds, no shutdown, no pressure loss.

Sizes: 1½″ through 6″
Connections: ANSI 150# · 300# · Butt-Weld
Body: Carbon Steel · 304L / 316L SS
Max Pressure: 675 PSI (300# / BW)
Seals: Buna-N · Viton® · Neoprene
Compliance: API 614
HICORP 6-way same-side porting transfer valve — flanged multiport valve installed in industrial enclosure

6-Way Same-Side Porting

Standard Features

  • ›Inlet and both outlets on the same side — simplified piping layout
  • ›Positive mechanical shoe-seal — zero leakage in both positions
  • ›Continuous flow changeover — no shutdown or pressure loss
  • ›Stainless steel operating shaft and internal mechanism
  • ›Low operating torque — manual or actuated operation
  • ›API 614 designed and tested
  • ›Flanged (150# / 300#) or butt-weld connections
  • ›Internals interchangeable with HYCOA JR-33
HICORP 6-Way Same-Side Transfer Valve dimensional drawing — four views showing butt-weld option, port layout (inlet port #1, outlet port #2, ports #3–#6), tee handle, operating handle, and labeled dimensions A–G

Approximate Dimensions

All dimensions in inches. Consult factory for certified drawings.

Valve SizeABCDEFGWeight
1½″ (150/300#)6-3/8103-15/1613-3/420-3/1655-1/276 lb
2″ (150/300#)6-3/4123-1/213-3/420-3/1676-1/499 lb
3″ (150#)7-3/4144-1/416-1/422-3/476-3/4161 lb
3″ (300#)8-1/2144-1/41723-1/276-3/4210 lb
4″ (150/300#)10-1/4215-3/82128-3/487-7/8254 lb
6″ (150#)11-1/2267-9/1625-1/432-13/169-7/810431 lb
6″ (300#)13267-9/1626-3/434-1/89-7/810545 lb

Contact factory for certified configuration-specific drawings.

Pressure & Temperature Ratings

Pressure Ratings
150# ANSI Flange260 PSI — CS @ 200°F
300# ANSI Flange675 PSI — CS @ 200°F
Butt Weld675 PSI — CS @ 200°F
Max Diff. P (1½″–2″)100 PSI
Max Diff. P (3″–4″)75 PSI
Max Diff. P (6″)50 PSI
Temperature Ratings
Viton®350°F max
Neoprene250°F max
Buna-N200°F max

Operating Instructions

1

Open equalizing/fill line valve and allow pressure to balance.

2

Turn "T" handle counterclockwise ≈6–7 turns.

3

Push ball handle down to unseat shoes.

4

Rotate ball handle 180° (red arrow points to active ports).

5

Release ball handle and hand-tighten "T" handle clockwise (20 in-lb max).

6

Close equalizing valve.

Note: An equalizing line is required for proper operation. Consult factory if your system does not include one.

Ready to specify the 6-Way Same-Side Valve?

Contact Northeast Controls for sizing assistance, certified drawings, or a quotation.

Request PricingCall