Series MSL-100 Sight Light UL 1571 Listed

The UL-1571 Listed Series MSL-100 mini sight light provides highintensity illumination for sightglasses and sight flow indicators. Manufactured in the USA from stainless steel and with gasketed joints, these fixtures are ideally suited for corrosive environments and sanitary applications found in the dairy, food, and pharma-ceutical industries. Rated for 120 volts and 100 watts makes wiring simple and straightforward. Fixture is optionally available rated for 24 volts and 20, 50 or 100 watts.

The Series MSL uses a powerful 120 Volt 100 Watt Tungsten Halogen bulb that has been matched with a conical reflector to provide maximum light output.  The Series MSL HI-LED uses a high intensity light engine designed to replace halogen technology.

The new HI-LED Lighting Series is a high intensity light engine designed to replace halogen technology. The HI-LED is not a standard LED bulb. Custom designed, it offers more robust technology than halogen bulbs. Unlike Halogen bulbs, HI-LED lamps have no filament and are not affected by vibration, impact, heat, dust, or surface oils. Since they do not generate heat, which causes halogen bulbs to burn out prematurely, they may be left on continuously without over heating the fixture housing. The HI-LED provides a bright white light and emits as much or more light intensity (candle power and lumens) as a 100 watt halogen bulb. HI-LED technology offers 40,000 - 45,000 hour lamp life for continuous duty (almost 5 years) versus 1,000 - 2,000 lamp life for halogen. HI-LED lighting is available for both non-hazardous and explosion-proof light fixtures.

High Intensity LED Light Engine Features:

• Introducing our new line of High Intensity LED [HI-LED]. This stateof-the-art technology is the solution for all your plant's process lighting applications. HI-LED technology means the end of frequent halogen lamp replacements. HI-LED fixtures do not overheat and will last for years without re-lamping. Each HI-LED Fixture can save your plant several thousands of dollars over its lifetime while at the same time demonstrating your company's commitment to the Environment!
• The HI-LED produces 22% MORE LIGHT
  INTENSITY [i.e. Candle Power/LUX/Lumens] than a standard 100 Watt Halogen lamp.
• The HI-LED operates on 93% LESS ELECTRICITY than a 100 Watt Halogen Lamp. An average yearly savings of 812 Kilowatts per year.
• The HI-LED provides users with approximately 35,000 ~ 40,000 hours of life [approx. 4 years] vs. 1,000
  Lamp life for halogen. [Results in significant savings when calculating the labor and bulb cost of frequent halogen lamp changes].
• The HI-LED does not generate the excessive heat that a 100Watt halogen lamp does. The HI-LED technology runs cool and can operate continuously without overheating the electronics and burning out the lamp. Also, HI-LED Fixtures do not transmit heat into sight glass or vessel which might a negative effect on some applications.
• The HI-LED fixtures are not affected by vibration or [reasonable] impacts because there is no filament! HI-LED are also resistant to heat, dust, and surface oils.
• The HI-LED fixtures emit a bright white light [high color temp]. Unlike with Halogen Lamps there no 'yellow' tint. They also have an even beam spread with no "dull" spots.