HYCOA 6-Way Inline Port Transfer Valve — The Problem Solver — Northeast Controls Inc.
Northeast Controls Inc.

HYCOA 6-Way Series · Inline Porting

6-Way Inline Port Transfer Valve

The Problem Solver · Zero Leakage · 1½″–8″ · To 1,600 PSI · API 598 & 614

Zero Leak
Patented shoe seal
1,600 PSI
Max pressure rating
1½″–8″
Valve sizes
Inline Ports
Straight-through run

Why "The Problem Solver"?

The inline port configuration places the inlet and outlet on opposite ends of the valve body — matching the straight-through pipe run of most existing duplex filter and cooler installations. This makes the 6-Way Inline the drop-in retrofit solution when a same-side port valve cannot be accommodated, and the preferred choice for new systems where a straight pipe run is required.

6-Way Inline Port Transfer Valve

A 6-way transfer valve controls fluid flow between two parallel circuits — typically a duplex filter or duplex cooler system — allowing one circuit to remain in service while the other is isolated for maintenance, cleaning, or element replacement. The 6-way valve has six ports: common inlet, common outlet, two filter/cooler inlets, and two filter/cooler outlets.

The HYCOA 6-Way Inline Port valve places the common inlet and common outlet on opposite ends of the valve body, creating a straight-through pipe run. This configuration is the natural fit for new duplex installations and the proven retrofit for existing systems where the piping runs straight through. No piping modifications are required when replacing a competitive inline-port valve.

The patented resilient sealing shoe provides true zero leakage across all operating conditions. The retracting actuator delivers zero frictional drag on change-over. Positive mechanical lockdown holds the seal firmly in place with no springs required. No lubricant is needed for operation.

6-Way Inline Features

→Inline port configuration — straight-through pipe run
→Patented Shoe Seal — Zero Leakage and Zero Frictional Drag on Crossover
→Positive Patented Mechanical Lockdown — No Springs
→Exceptionally Low Pressure Drop
→Fabricated Steel Construction — Special Configurations Available
→"Will Fit" System — Drop-In Replacements for Competitive Inline Valves
→Stainless Steel Internal Trim and Moving Parts
→Easy Low Torque Operation — Handle Extensions Not Required
→No Lubricant Required to Operate
→Pressure Ratings to 1,600 PSI
→Flanged or Butt Weld Connection
→Valve Sizes 1½″ Through 8″
→Spectacle Blinds Not Required for Tight Shut-Off
→Designed and Tested per API Standards 598 & 614
→Complete In-House Testing Facility

Technical Specifications

Port ConfigurationInline — common inlet and outlet on opposite ends of valve body
Flange RatingStandard Class 150# or 300# ASME B16.5
Connection OptionsFlanged or Optional Buttweld Pipe Nozzles
Body MaterialCarbon Steel (Standard) / Stainless Steel (Optional)
Shaft MaterialStainless Steel (Standard)
SealingSoft Seat Elastomer Sealing Pads — Zero Leak Design
Pressure RatingUp to 1,600 PSI
Sizes1½″ through 8″
Custom DesignsAvailable — Consult Factory
StandardsDesigned and Tested per API 598 & 614
LubricationNone Required

Dimensional Data

All dimensions in inches. * D dimension is to centerline of handle.

HYCOA 6-way inline transfer valve dimensional drawing — front, top, and end views with labeled ports and dimension references A through G
SizeABCD*EFGHI (150#)I (300#)J (150#)J (300#)K (150#)K (300#)Weight
1½″6-3/8″9-13/16″14-7/16″20-3/16″10″9-3/8″4-15/16″1″4—1/2″—3-7/8″—91 lbs
2″6-3/4″10-1/4″14-7/16″20-3/16″12″12″6-1/4″7/16″445/8″5/8″4-3/4″5″114 lbs
3″ (150#)7-3/4″12″17″22-3/4″14″12-1/2″6-7/8″1/8″4—5/8″—6″—176 lbs
3″ (300#)8-1/2″12-3/4″17-3/4″23-1/2″15″12-1/2″6-7/8″1/2″—8—3/4″—6-5/8″215 lbs
4″10-1/4″15-5/8″21-7/8″28-3/4″21″15-5/8″9″2-11/16″885/8″3/4″7-1/2″7-7/8″269 lbs
6″ (150#)11-1/2″18-3/16″26-1/8″32-13/16″26″24″12″4-3/4″8—3/4″—9-1/2″—480 lbs

*D = dimension to centerline of handle · I = Number of bolt holes · J = Bolt hole diameter · K = Bolt circle diameter · Consult factory for 8″ and special configurations.

6-Way Inline Port Model Numbers

Carbon Steel (J6C…IS…) and Stainless Steel (J6S…IS…) · Sizes 1½″–8″

Carbon Steel Models (J6C…IS…)

Model NumberSizeOperator
J6CBIS24BSX1½″Bare Stem
J6CVIS24BSX1½″Handwheel
J6CNIS24BSX1½″Pneumatic
J6CBIS32BSX2″Bare Stem
J6CVIS32BSX2″Handwheel
J6CNIS32BSX2″Pneumatic
J6CBIS48BSX3″Bare Stem
J6CVIS48BSX3″Handwheel
J6CNIS48BSX3″Pneumatic
J6CBIS64BSX4″Bare Stem
J6CVIS64BSX4″Handwheel
J6CNIS64BSX4″Pneumatic
J6CBIS96BSX6″Bare Stem
J6CVIS96BSX6″Handwheel
J6CNIS96BSX6″Pneumatic
J6CBIS128BSX8″Bare Stem
J6CVIS128BSX8″Handwheel
J6CNIS128BSX8″Pneumatic

Stainless Steel Models (J6S…IS…)

Model NumberSizeOperator
J6SBIS24BSX1½″Bare Stem
J6SVIS24BSX1½″Handwheel
J6SNIS24BSX1½″Pneumatic
J6SBIS32BSX2″Bare Stem
J6SVIS32BSX2″Handwheel
J6SNIS32BSX2″Pneumatic
J6SBIS48BSX3″Bare Stem
J6SVIS48BSX3″Handwheel
J6SNIS48BSX3″Pneumatic
J6SBIS64BSX4″Bare Stem
J6SVIS64BSX4″Handwheel
J6SNIS64BSX4″Pneumatic
J6SBIS96BSX6″Bare Stem
J6SVIS96BSX6″Handwheel
J6SNIS96BSX6″Pneumatic
J6SBIS128BSX8″Bare Stem
J6SVIS128BSX8″Handwheel
J6SNIS128BSX8″Pneumatic

IS = Inline Same-side porting code. Pressure drop curves and dimensional drawings available upon request. Contact Northeast Controls Inc. for application engineering, sizing, and pricing.

Replacement Shoes

Buna and Viton sealing shoes · Sizes 1½″–8″

Replacement Shoes — Buna & Viton

Part NumberElastomerSize
220-2-0032-012Buna1½″
220-2-0032-014Viton1½″
220-2-0032-012Buna2″
220-2-0032-014Viton2″
220-2-0048-012Buna3″
220-2-0048-051Buna3″
220-2-0048-014Viton3″
220-2-0048-052Viton3″
220-2-0064-012Buna4″
220-2-0064-014Viton4″
220-2-0096-012Buna6″
220-2-0096-014Viton6″
220-2-0128-012Buna8″
220-2-0128-014Viton8″

Stack Assembly Tools

Part NumberSize
H41L-102211½″ & 2″
H41L-102223″
H41L-102234″
H41L-102246″

Note: Stack assembly tools are required for proper shoe installation. Order the correct tool for your valve size when ordering replacement shoes.

Soft Parts Kits

Standard Series Valves · Bolted Bonnet and Victaulic end connections · Buna or Viton

Part NumberDescriptionSize
220-2-0032-083Bolted Bonnet / Buna1½″ & 2″
220-2-0032-085Bolted Bonnet / Viton1½″ & 2″
220-2-0032-011Victaulic / Buna1½″ & 2″
220-2-0032-015Victaulic / Viton1½″ & 2″
220-2-0048-083Bolted Bonnet / Buna3″
220-2-0048-085Bolted Bonnet / Viton3″
220-2-0048-011Victaulic / Buna3″
220-2-0048-015Victaulic / Viton3″
220-2-0064-083Bolted Bonnet / Buna4″
220-2-0064-085Bolted Bonnet / Viton4″
220-2-0064-011Victaulic / Buna4″
220-2-0064-015Victaulic / Viton4″
220-2-0096-083Bolted Bonnet / Buna6″
220-2-0096-085Bolted Bonnet / Viton6″
220-2-0096-011Victaulic / Buna6″
220-2-0096-015Victaulic / Viton6″
220-2-0128-083Bolted Bonnet / Buna8″
220-2-0128-085Bolted Bonnet / Viton8″

Typical Applications

→New duplex filter installations with straight-through pipe runs
→Retrofit replacement for existing inline-port problem valves
→Duplex lube oil filter systems
→Duplex fuel oil filter systems
→Duplex oil cooler circuits
→API lube oil unit protection
→Turbine lube oil systems
→Hydraulic power unit filter circuits
→Marine and offshore lube oil systems
→Any system where same-side porting cannot be accommodated

Request Pricing or Application Engineering

1-201-419-6111 · [email protected]

Request PricingCall