Natural Gas Filter Elements
Anderson provides both liquid and solids removal for critical-use natural gas applications. Elements are available for coalescing (aerosol and liquid removal) and particle filtration, with series specified by major OEMs for power generation turbines. All elements are manufactured by Clark-Reliance's Purity Products Group.
Available Element Series
2710-Series — Fuel Gas Coalescing Elements
OEM SpecifiedWhen gas must be absolutely clean and dry — free from particulates, liquids, and entrained oils — the 2710-Series protects critical process applications for increased reliability and overall performance. Co-pleated microglass and synthetic media with a perforated stainless steel outer jacket. OEM-specified for gas turbine inlet and fuel gas systems.
Operating Conditions
Media & Construction
Removal Efficiencies
Dimensions — E Series
| Field | Options |
|---|---|
| E1 | ID 11.000" · OD 15.750" · Length 24.63" |
| E2 | ID 4.250" · OD 8.750" · Length 20.00" |
| E3 | ID 11.000" · OD 15.750" · Length 24.38" |
Dimensions — H Series
| Field | Options |
|---|---|
| H2 | ID 11.000" · OD 15.750" · Length 24.63" |
| H4 | ID 8.875" · OD 12.500" · Length 24.50" |
| H5 | ID 8.875" · OD 12.500" · Length 24.50" |
| H6 | ID 11.000" · OD 15.750" · Length 24.63" |
| H7 | ID 11.000" · OD 17.500" · Length 36.25" |
| H9 | ID 4.250" · OD 7.750" · Length 36.50" |
Seal Type Options
ACR-836 — Gas Coalescing Elements (Large Diameter)
Protect critical natural gas process applications for increased reliability and overall performance. Designed to optimize particle retention, aerosol coalescence, and drainage with low pressure drop. Removal efficiency rating based on ANSI/CAGI 400 testing protocol. Co-pleated microglass and fiberglass media with aramid felt drain sleeve.
Operating Conditions
Media & Construction
Configuration Options
| Field | Options |
|---|---|
| Micron Rating | 003 = 0.3 µm |
| Application Note | H = High Temperature |
| Seal Material | B = Buna · V = FKM |
ACR-Series — Gas Coalescing Elements (Standard)
Protect critical process applications for increased reliability and overall performance. Designed to optimize particle retention, aerosol coalescence, and drainage with low pressure drop. Removal efficiency rating based on ANSI/CAGI 400 testing protocol. Pleated microglass media with polyester felt drain sleeve.
Operating Conditions
Media & Construction
Configuration Options
| Field | Options |
|---|---|
| Outside Diameter | 3 = 3.775" · 4 = 4.563" · 5 = 5.625" · 6 = 6.000" |
| Nominal Length | 16 = 16.00" · 18 = 18.00" · 19 = 19.00" · 24 = 24.00" · 30 = 30.00" · 36 = 36.00" |
| Micron Rating | 003 = 0.3 µm |
| Seal Material | B = Buna · G = Gylon · T = PTFE · V = FKM |
| Cap Configuration | Blank = DOE · CE = SOE w/ Bolt Hole · CP = SOE w/ Post · SS = 304 SS Caps/Cores |
CRSF-836 — Gas Particle Filter Elements
Absolute particle retention delivers the lowest single-pass particle counts, differential pressure, and reduced flush times. Premium pleated microglass media maximizes surface area for greater dirt-holding capacity, longer service life, and reduced cost of ownership. For natural gas applications where solid contaminant removal is the primary requirement.
Operating Conditions
Media & Construction
Configuration Options
| Field | Options |
|---|---|
| Micron Rating | 01 = 1 µm · 03 = 3 µm |
| Seal Material | V = FKM |
Need help selecting the right element?
Call 1-201-419-6111 or email [email protected]