|
Jensen
Series 400 Mixers
|
|
 Jensen
Series 400 Mixers are heavy duty, belt driven units designed
for long life and trouble free operation. The three sizes
in this series are shown in the table below. For petroleum
services. Maximum horse power 50 & belt driven.
|
| |
| MODEL |
420 |
450 |
480 |
| HORSEPOWER
(MAX.) |
10 |
30 |
60 |
| SHAFT
R.P.M. |
433 |
440 |
427 |
| CRITICAL
SPEED* |
2,360
RPM |
1,960
RPM |
2,520
RPM |
|
|
|
|
|
| |
|
*PROPELLER
SHAFT FIRST CRITICAL SPEED
|
| |
| Jensen Mixers hang
directly on your tank's manway (only). No need for additional
equipment such as tie rods and/or a base (unlike our competition). Jensen
Mixers' short shaft design (which is supported both at the front
and rear of the shaft) provides for vibration-free service. This
ensures a long life to the mixer's mechanical seal, gearbox,
bearings etc. Only Jensen Mixer provides you with a (mixer)
propeller custom pitched for your application. Jensen Mixer
has well over 15,000 mixers in service today. Go with Jensen
and get unequaled experience, time proven designs that out-perform
and out-last all of our competitors. |
| |
| JENSEN
MODEL 400 DRIVE TRAIN |
| The rugged V-belt drive
train in the Series 400 Mixers is designed for long life and
maximum reliability. Recent advances in V-belt technology
have largely eliminated the need for frequent belt inspection
and adjustment. |
| |
| JENSEN MODEL
400 GENERAL FEATURES |
| Shaft and wear sleeve - Stainless Steel |
| Lock ring, lock bushing, & seal
housing - 316 Stainless Steel |
| Drive Yoke - 356-T6 Aluminum |
| Propeller- Cast Carbon Steel |
| O Rings - Viton "A" |
| |
|
RELATED
PRODUCT LINKS |
| Jensen
Type "F" Mechanical
Seal |
| Series
400 Fixed Angle for Blending Application |
| Series
400 Vari-Angle for Cleaning Applications |
|
See
Flash Demo of Vari-Angle Mixer
|
| Why
Use a Vari-Angle |
| Series
400 Installation, Operation and Maintenance Manual |
| |
| SELECTION
OF THE JENSEN MODEL 400 |
| Defining your requirements
and selecting the right mixer to do the job is most important. Jensen
offers a mixer specifically tailored to every need. |
| |
| Mixer applications
can be separated into two categories: |
| 1). BLENDING -
Mixing two or more fluids. Select the Jensen Model 400
Fixed-Angle Mixer. |
| 2). CLEANING -
Removing sediment accumulations from tank bottoms. Select
the Jensen Model 400-VA Vari-Angle Mixer. |
| |
In
cases where both services are required, the Vari-Angle should
be selected.
Jensen process recommendations are
fully guaranteed. Jensen mixers are guaranteed against
defects for 12 months. |
| |
 |
|
|
|
|
