|
|
|
|
| |
C. Select Enclosure
Series D |
|
| |
| General Purpose |
Hoffman-Type
Box |
| For
indoor use and other general purpose applications
under normal atmospheric conditions. Provides protection
against dust and light splashing. Heavy gauge plain steel
case. Flanged case available. Transparent cover for visible
on-off operation. Locking device prevents tampering. Pressure
connection, 1/4" NPT Electrical connection back of
case for 1/2" conduit or BX. Shipping wt. 4 Ibs. Furnished
as standard unless otherwise specified. |
Hoffman-type
box enclosure for outdoor or indoor applications
subject to frequent hosings and/or the presence of fibers,
dust, and lint. Constructed of phosphated and enameled
14 gauge steel with continuously hinged neoprene gasketed
cover. External screw clamps on three sides. External
mounting holes. Shipping wt. 20 Ibs. Optional, specify "Hoffman
Enclosure" when ordering. |
| See
General Purpose NEMA 1 Enclosure |
See
Weatherproof NEMA 1, 1A, 2, 3, 4, & 12 Enclosure |
| |
| For Outdoor
or Indoor Applications |
Explosion Proof |
| For
outdoor or indoor applications. Complies with
hose test and requirements for watertight, dust-tight,
driptight, weatherproof, weather-resistant, splash-proof,
sleet-proof, and moisture-resistant. Flanged, heavy
gauge steel case with transparent cover for visible
on-off operation. External adjustments protected by
cover. Bottom pressure connection, 1/4" NPT. Electrical
connection back of case for 1/2" conduit, removable
1/2" hub. Shipping wt. 6 Ibs. See Pg. 52 for dimensions.
Optional, add "W" to prefix, i.e. DAW, DRW,
DSW, when ordering.
Weather-resistant,
Rain-tight/Type N3-W NEMA 3R Enclosure Similar to Type
W watertight, dusttight NEMA 3S, 4, and 4X enclosure,
except includes drain in cover and does not have removable
1/2" conduit hub. Shipping wt. 6 Ibs. Optional,
add prefix "W" and "W,"i.e. N3-DAW,
N3-DRW, N3-DSW, when ordering. |
Explosion
Proof Suitable for Class I, Groups C and D; NEMA
7; Class II, Groups E, F, and G; Class 111, NEMA 9 and
9A, Division 1. Control mechanism is an integral part
of enclosure and cannot be replaced in field. For surface,
panel, or pipe mounting. Natural aluminum finished case
with transparent glassfronted cover for visible on-off
operation. Pressure connection at bottom, 1/2" male
thread with 1/4" female thread. External adjustments.
Available with breather and drain. Shipping wt. 8 Ibs.
See Pg. 52 for dimensions. Optional, add "H" to
prefix, i.e. DAH, DRH, DSH, when ordering. |
| See
Watertight, Dust-tight/Type W NEMA 3S, 4, & 4X Enclosure
Hazardous Area Enclosure |
See
Explosion-Proof/Type H Hazardous Area Enclosures |
|
| |
| Hazardous Location |
|
Hazardous
Location Suitable for Class I, Groups C and D,
NEMA 7 and Class II, Groups E, F, and G, NEMA 9 and 9Aapplications.
Control mechanism is not integral to enclosure and, therefore,
may be removed if required. Transparent cover is removable,
permits visibility of on-off operation. Pressure connection,
1/4." Electrical connection 3/4:' Available with breather
and drain. Shipping wt. 20 Ibs. Size, 1013/16" W x
10»/is" H x 69/16" D. D. Optional, add "E" to
prefix, i.e. DAE, DRE, DSE, when ordering. |
| See
Explosion-Proof/Type E Hazardous Area Enclosure |
| |
| NOTE: Standard general purpose
NEMA 1 enclosure is suitable for Class I, Division 2 applications
with addition of conduit hub (mercury switch models only). |
| |
|
|
|
|
| |
| Northeast Controls Incorporated |
| Tel: 1-201-327-7660 | Fax: 1-201-327-3242 | email: sales@nciweb.com |
| 123 Pleasant Avenue - Upper Saddle River - New Jersey 07458 USA |
| © 1995-2008 Northeast Controls Incorporated. All Rights Reserved. |
| |
|
|
|
|
|
|
