Series WD2010 · Max 200 psig
Steam & Cold Water Mixing Stations
WD2010 — Bronze or Stainless Steel
Wide operating ranges, safe, low-maintenance design typify the WD2010 Series hot water washdown stations. Steam and cold water are carefully and thoroughly mixed to provide instant hot water on demand.
Using proportional flow water and steam control valves, the operator adjusts the washdown station to deliver the desired hot water temperature as indicated on the dial thermometer. By depressing the ergonomically designed fail-safe trigger, the operator can direct a steady flow of hot water from a fine spray to a solid jet.
Offered in both Bronze and Stainless Steel. Maximum pressure rating of 200 psig.
SAFETY COMES FIRST — NO WATER, NO STEAM
Our Steam/Water Washdown Stations employ a unique valve and diaphragm technology. Steam is automatically blocked from discharging using a specially engineered diaphragm device that uses steam supply pressure to positively close the steam inlet valve to the mixing chamber. The station does not rely on temperature sensors or electrical devices. If cold water is restricted at any time, steam is automatically shut off.
Model Selection Chart
| Model | Water Supply Pressure | Steam Supply Pressure | Max Discharge Temp | Discharge Flow |
|---|---|---|---|---|
| WD2010L | 30–80 psig | 10–60 psig | 190°F | 3–4.5 gpm |
| WD2010M | 30–80 psig | 35–150 psig | 190°F | 3–8.5 gpm |
| WD2010H | 30–80 psig | 60–200 psig | 190°F | 3–9 gpm |
Model Selector
Enter your supply pressures to find the right WD2010 model.
Discharge Temperature Calculator
Estimate the final discharge temperature for the WD2010 based on your operating conditions.
Features & Benefits
- Easily maintained — no carbonate build-up at steam inlet valve
- No special tool kits needed
- Manually operated flow proportioning control valves
- Internal steam and water check valves to prevent back-flow
- Integral steam-water venturi mixer for consistent mixing
- Discharge liquid temperature indicating dial gauge
- Simple wall mounting design with "mount-compatibility"
- Discharge hose with swivel connections on each end
- Fail-safe trigger-actuated spray gun or shut-off lance
- Stainless steel hose rack for convenient hose storage
Available Materials
- Standard: Bronze Construction
- Optional: Bronze with 316SS Mixing Nozzle (extends service life)
- Optional: Full Stainless Steel
Mounting Configurations
Standard Wall Mounted
Lag bolts and anchors provided for securing to an existing vertical surface.
Optional Floor Pedestal
Floor mounted unit; stainless steel cover, box and tube. Ideal where floor piping is accessible. All water and steam piping is concealed.
Optional Recessed Wall Mixing Unit Enclosure
Mixing unit is mounted within a stainless steel enclosure with removable cover panel. Valve bonnets, dial thermometer, and outlet project outside the enclosure.
Optional Recessed Wall Full Unit Enclosure
Mixing unit and discharge hose are mounted within a stainless steel enclosure with hinged door. Water and steam piping, valves, and dial thermometer are concealed.
Request Pricing on WD2010 Steam Washdown Stations
1-201-419-6111 · [email protected]