|
MagneSonics MLS Horizontal
Mount Magnetic Level Switch |
 Operation is achieved using the time proven principle of repelling magnetic forces. One permanent magnet forms part of a float assembly which rises and falls with changing liquid level. A second permanent magnet is positioned within the switch head so that the adjacent poles of the two magnets repel each other through a non-magnetic diaphragm. A change in liquid level moves the float through its permissible range of travel causing the float magnet to pivot and repel the switch magnet. The resulting snap action of the repelling magnets actuates the switch.
- Magnetic Snap Action
- All Stainless Steel Wetted Parts
- SPDT 5A Contacts
- Integral Conduit Box
- Magnetic Latching
- Class I, Div. 1, Grp. C & D Enclosure
- CSA Approved
- See
Larger Image
- See Dimensions
|
|
| |
| TYPICAL APPLICATIONS |
- Petroleum
Processing - Fuels, lubricating oils, hydraulic
fluids, separators, treaters, crude oil, fuel-water
interfaces.
- Chemical
Processing - Acids,
alkalis, ammonia, paints, lacquer, peroxides, alcohols,
printing inks, freon.
- Food
Processing - Beverages,
fruit juices, cooking oils.
- Pharmaceutical and Cosmetic - Liquids,
emulsions, lotions, solutions.
- Marine
Operations - Fuel
oil, hydraulic fluid, bilge level alarms, sea water, coolant,
condensate levels, cargo levels.
- Reactor
Operation - Level
control, alarm signalling.
- Cryogenic Liquids - Liquid methane,
nitrogen, carbon dioxide, oxygen.
- Water Industry - Flood control,
reservoir levels.
- General - Leak
detection, overflow alarm, low level alarm in evaporators.
|
| |
| Model Selection Guide |
| MLS |
|
|
Magnetic Level Switch |
Trim Material |
|
|
|
Code |
|
Body Material |
T-316 SST |
|
|
|
1 |
|
T-303 SST |
T-316 SST |
|
|
|
2 |
|
T-316 SST |
|
|
|
|
|
Code |
Switch Form and Function |
Max Temp. |
|
Switch Rating |
|
|
|
1 |
SPDT Standard Switch |
450°F |
5A @ |
120 VAC |
|
|
|
2 |
DPDT Standard Switch |
450°F |
5A @ |
120 VAC |
|
|
|
3 |
SPDT High AMP Rating |
250°F |
11A @ |
120 VAC |
|
|
|
4 |
DPDT High AMP Rating |
250°F |
11A @ |
120 VAC |
|
|
|
5 |
SPDT High Temperature |
750°F |
5A @ |
120 VAC |
|
|
|
6 |
DPDT High Temperature |
750°F |
* 4A @ |
120 VAC |
|
|
|
7 |
SPDT Hermetically Sealed |
400°F |
* 4A @ |
120 VAC |
|
|
|
8 |
DPDT Hermetically Sealed |
400°F |
* 4A @ |
120 VAC |
|
|
|
|
|
|
|
|
|
|
|
|
Pressure |
Rating |
Min. S. G. |
|
|
|
|
|
1500 PSIG |
@ 100°F |
0.50 |
|
|
|
|
|
285 PSIG |
@ 100°F |
0.50 |
|
|
|
|
|
740 PSIG |
@ 100°F |
0.50 |
|
|
|
|
|
1480 PSIG |
@ 100°F |
0.50 |
|
|
|
|
|
285 PSIG |
@ 100°F |
0.50 |
|
|
|
|
|
740 PSIG |
@ 100°F |
0.50 |
|
|
|
|
|
1480 PSIG |
@ 100°F |
0.50 |
|
|
|
|
|
450 PSIG |
@ 100°F |
0.50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Flange Material |
|
|
|
|
|
|
All NPT models use this code |
|
|
|
|
|
|
A105 C.S. |
|
|
|
|
|
|
A182 T304 SST |
|
|
|
|
|
|
A182 T316 SST |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*Note: Not Recommended for |
|
|
|
|
|
|
60 HZ applications |
|
|
|
|
|
|
|
|
| MLS |
1 |
1 |
|
Typical Model |
|
|
|
| |
|
|
