|
Series IT Infrared Temperature
Probe |
Series
IT Noncontact Infrared Probe plugs directly into
thermocouple meters, dataloggers, or chart recorders
to measure the temperature of hot, hazardous, or moving
objects without risk of injury or contamination. Measure
spot sizes dwon to 0.1" (2.5 mm) in diameter -
Ideal for circuit board troubleshooting or electrical
maintenance application. Units feature an internal switch
for selecting °F or °C. |
|
PHYSICAL DATA |
Temperature
Range: |
0 to
500°F (-18 to 260°C), selectable |
Accuracy: |
±2 of
reading or ±3F (±2C), whichever is greater @
81°F (7°C) |
Repeatability: |
±1%
of reading or ±2F (±1C), whichever is greater |
Response
Time: |
1 second |
Spectral
Response: |
8 to
14 micons, pyroelectric detector |
Distance-to-Target
Size Ratio: |
4:1
nominal |
Emissivity: |
Fixed
at 0.95 |
Output: |
1 mV
per °F or °C |
Ambient
Operating Temperature: |
32 to
150°F (0 to 65°C) |
Storage
Temperature: |
-13
to 158°F (-25 to 70°C) |
Connection: |
Type
J or K mini-connector |
Power: |
one
9V alkaline battery (included) |
Average
Battery Life: |
Approximately
50 hours |
Weight: |
6.4
lbs. (180 g) |
|
|
Model
Number |
Description |
IT1
IT2 |
Type
J thermocouple connection
Type K thermocouple connection |
|
|
Model 4380 Process Signal Converter
/ Isolator |
The
Iso-Verter®II
Isolator/Converter protects electronic circuits
by completely isolating the input and output signals
from each other and from ground. Both input and output
ranges are fully field selectable with easy to adjust
switches. With bipolar input selection and zero suppression,
nearly any standard input/output range combination is
possible. Zero and span adjustments are easily accessible
on top of housing. Units plug into universally available
octal sockets for quick easy installation. Industry
standard "pin-out" wiring configuration allows
direct replacement of most competitive models. Order
optional 481-0159 socket for new installations. |
|
RANGES
AVAILABLE (Field Selectable) |
Inputs |
Outputs |
Current |
Voltage |
Current |
Voltage |
0-5
mA
0-10 mA
0-20 mA
0-50 mA |
0-100
mA
1-5 mA
4-20 mA
10-50 mA |
0-100V
0-200V
0-500V
0-1V |
0-5V
0-10V
1-5V
2-10V |
0-1
mA
0-5 mA
0-20 mA
1-5 mA
4-20 mA |
0-1V
0-5V
0-10V
1-5V
2-10V |
|
|
|
|
PHYSICAL
DATA: |
Isolation: |
1500 VAC |
Linearity: |
0.1% of full span |
Drift: |
±0.02%/°C typical;
±0.05%°C maximum |
Ambient
Operating Temperature: |
32 to 131°F (0 to
55°C) |
Output
Loads: |
Current: 600 ohms
maximum
Voltage: 500 ohms minimum (20 mA maximum) |
Input
Impedance: |
Current: 10 ohms,
Voltage: 1 megohm |
Power
Supply: |
85-265 VDC/VAC,
50-400 Hz |
Case
Size: |
(including socket
pins)
2 3/8"W x 3 7/16"H x 1 ¾"D
60.3 mm W x 87.3mm H x 44.4 mm D
Height is 2 7/8" (73 mm) above socket |
Mounting: |
Industry standard
octal socket |
|
|
Previous
Page |
|
|