Contact Dwyer Sales Department: 1-201-419-6120  |  dwyer@nciweb.com


************ THIS PRODUCT IS NO LONGER AVAILABLE ****************

Model WMS 10 Wireless Temperature Monitor

3 Channels, °F or °C, Large Dual Display
 
Simultaneously Monitor local and remote temperatures with the Model WMS10 Wireless Temperature Monitor. Simply place the remote sensor at any location up to 100 ft. (30 m) away from the receiver-no additional setup is required. Each of the receiver's three channels can monitor the temperature of an individual remote sensor. Additional remote sensors (Model WMS5) can be purchased separately. The remote sensors and the receiver can be either table or wall mounted. Large 2" LCD located on the receiver displays both local and remote temperatures in °F or °C (user selectable). Display also indicates receiver signal status, rising/falling temperature trends and low battery. Additional features include an audible alarm for each channel and high/low temperature memory.
 
PHYSICAL DATA
Operating Range: -4 to 122°F (-20°C to 50°C).
Resolution: 0.2°F (0.1°C).
RF Transmission Frequency:433 MHz.
RF Temperature Range: 100 ft (30m) maximum
Temperature Sensing Cycle: Approximately 30 seconds.
Weight: Remote Sensor: 3.5 oz (100 g); Receiver: 9 oz. (50 g).
Dimensions: Remote Sensor: 3 5/8" x 2 3/8" x 27/32" (92 x 60 x 21 mm);Receiver; 4 5/8" x 4 7/32" x 1 1/32" (117 x 107 x 26 mm).
Power: Four AA Alkaline batteries (two per unit).
 
STOCKED MODELS
Model Number WMS10 Wireless Temperature Monitor
 
ACCESSORIES:
ModelWMS5 Additional Temperature Sensor