Contact Dwyer Sales Department: 1-201-419-6120  |  dwyer@nciweb.com


'); newWindow.document.write('
'); newWindow.document.write('Click screen to close'); newWindow.document.write('
'); newWindow.document.close(); newWindow.focus(); } } //-->
 

Dwyer Series 1500 Temperature Controller

1/16 DIN, Microprocessor Based, Self Tuned
 



Dimensional Enlargement

 
STOCKED MODELS
Model Input Ouput Alarm
15011 Thermocouple SSR No
15111 Thermocouple SSR Yes
15012 Thermocouple 5 VDC Logic No
15112 Thermocouple 5 VDC Logic Yes
15013 Thermocouple Relay No
15113 Thermocouple Relay Yes
15021 RTD (DIN) SSR No
15121 RTD (DIN) SSR Yes
15022 RTD (DIN) 5 VDC Logic No
15122 RTD (DIN) 5 VDC Logic Yes
15023 RTD (DIN) Relay No
15123 RTD (DIN) Relay Yes
 
PHYSICAL DATA
Inputs: Thermocouple (J type stocked), field selectable K or T type: RTD (100Ohms DIN).
Input Impedance: Thermocouple (3 megohms min.); RTD current (200 mA max.)
Accuracy: ±0.25% of span ±1 least significant digit.
Displays: 4 digit, 7 segment 0.3" high LED display; Set Point and Alarm status LED indicators; °F or °C LED indicators.
Temperature Range: Operating -10° to 55°C (14° to 131°F); storage -40° to 80°C (-40°F to 176°F).
Supply Voltage: 100 to 240 VAC, 50 - 400 Hz. single phase; 132 to 240 VDC (nom.) ±10% - 20%. 5 VA maximum power consumption.
Isolation: Relay and SSR outputs are isolated. 5 VDC logic output must not share common ground with input.
Sensor Break Protection: De-energizes control output.
Output Ratings: SSR: 3.5A @ 240 VAC max. @ 25°C typical. Relay (SPST): 3A res., 1.5A ind. @ 250 VAC; Pilot Duty = 250 VA, 2A @ 125 VAC or 1A 01250 VAC, Logic (non-isolated): 5 VDC @ 25 mA max.
Alarm Rating (optional: Relay (SPST): 3A res., 1.5A ind. @ 250 VAC.
Weight: 227 9 (8 oz.).