Dwyer Sales Department: 1-201-419-6111 ext. 26 for Sales Group  |  dwyer@nciweb.com


Series HU  Temperature/Humidity Transmitter

0 to 100% RH, ±2% Accuracy, NEMA 4 (IP56) Enclosure
The ultra-fast Series HU Transmitter provides a stable, repeatable, and accurate means of measuring humidity or both temperature and humidity in the harshest of environments The polymer capacitance sensor is not affected by condensation, fog, high humidity or contaminants. Sophisticated integrated circuits provide a fully conditioned and temperature compensated 4-20mA output signal. For humidity or temperature/humidity control, a rugged NEMA 4X (IP56) fully gasketed duct mount enclosure is available or for monitoring space humidity, choose the ABS plastic wall mount enclosure. Units also feature non-interacting zero and span adjustments, short circuit protection and reverse polarity protected output.
PHYSICAL DATA
Relative Humidity Range: 0 to 100% RH.
Temperature Range: -30 to 130°F (-35 to 55°C).
Hysteresis: ±1%.
Output: 4-20mA, 2 wire.
Supply Voltage: 12-40 VDC.
Loop Resistance: 3000 Ohms max. @ 40 VDC.
Compensated Temperature Range:-30 to 130°F (-35 to 55°C).
Response Time: 60 msec.
Stability: ±2 RH over 2 years.
Zero and Span: ±15%, non-interactive.
Operating Temperature Range: -30 to 130°F (-35 to 55°C).
Operating Relative Humidity: 10 to 90% RH, non-condensing.
Temperature Sensor: Pt 1000 Ohms RTD.
Enclosure: Duct Mount: Cold-Rolled Steel, NEMA 4 (IP56) or Wall Mount: ABS plastic.
Electrical Connections: Unpluggable screw terminal block.
Conduit Connection:1/2" (22.3 mm) knockout.
Weight:Duct Mount: 1.0 lbs (.45 kg); Wall Mount: 0.5 lbs (.25 kg) .

STOCKED MODELS
Model Number Description
HU0142 Humidity Transmitter, duct mount
HU0242 Humidity Transmitter, wall mount
HU1142 Humidity/Temp. Transmitter, duct mount