Sanitary Turbine Flow Meter

Blancett's FloClean, sanitary turbine flow meter was developed for use in a wide variety of food, beverage and pharmaceutical applications. The FloClean offers the end user a means of cost efficient measurement while providing accuracy, versatility and durability.

Simple in design and construction, FloClean utilizes the latest advances in polishing technology on all internal components. FloClean meets the requirements of 3-A Sanitary Standard number 28-03 and is recommended for use in clean- in-place (CIP) and sterilize-in-place (SIP) environments.

The FloClean signal output is a sine-wave that is proportional to volumetric flow. Optional Blancett electronics provides local flow rate and volume totaliztion and will interface with most instruments, PLC's and computers.

See FloClean 3-A Sanitary Meter with NEMA 6 pick-up
 
Specifications
Material of Construction:
  • Body and internal wetted parts: 316L Stainless Steel
  • Bearing / Shaft: Nickel Bindery Tungsten Carbide (Std) | Ceramic, Tungsten Carbide (Opt)
  • Turbine: Nickel Plated CD4MCU Stainless Steel
Flow Accuracy: +/- 1.0%
Repeatability: +/- 0.1%
Calibration: Water (NIST Traceable Calibration)
Pressure Rating: 1,000 psi (Rating based on sanitary end connection)
Temperature Rating: - 150° F to +300° F (-100° C to 149° C)
End Connections: Sanitary Clamp End
Mag Pick-up: NEMA 6 Standard
 
Specifications
  Material of Construction:

Body and internal wetted parts: 316L Stainless Steel
Bearings: Nickel bindery tungsten carbide and Ceramic
Turbine: Nickel Plated CD4MCU Stainless
Shaft: 316L Stainless Steel

  Turndown Ratio:

10:1

  Accuracy:

.+/- 1% of Reading

  Repeatability:

.+/- 1%

  Operating Pressure:

1000 psi (Rating based on Tri-Clamp sanitary connections)

  Operating Temperature:

350º F (177º C)

 
Operating Principle

Simple in design and construction, FloClean utilizes the latest advances in polishing technology on all internal components to minimize all potential sites for bacterial growth. FloClean meets the requirements of 3-A Sanitary Standards #28-03 and is recommended for use in clean-in-place (CIP) and sterilize-in-place (SIP) environments.

The FloClean produces a sine-wave signal proportional to its volumetric flow rate. With optional Blancett electronics the meter provides local flow rate and volume totalization and will interface with most instruments, PLC's and computers.

 

Clamp
Size

Meter
Size

Flow Rate
GPM LPM
K-Factor
Pulse/Gal
End to End
Length
3/4" 3/8" 0.30-3.00 1.10-11.0 20,000 3"
3/4" 1/2" 0.75-7.50 3.0-30 13,000 3"
3/4" 3/4" 2.0-15.0 7.5-57 2,750 3"
1-1/2 " 1/2" 0.75-7.50 3.0-30 13,000 4"
1-1/2 " 3/4" 2.0-15.0 7.5-57 2,750 4"
1-1/2 " 7/8" 3.0-30.0 11-110 2,686 4"
1-1/2 " 1" 5.0-50.0 19-190 870 4"
1-1/2 " 1-1/2" 15-180 57-680 330 6-1/4"
2-1/2" 2" 40-400 150-1,500 52 6-1/2"
 
 
 
Previous Page