Contact Dwyer Sales Department: 1-201-419-6120  |

Model TM SAFE-T-OHM Shoe Tester

For Electrostatic Dissipating (ESD) Footwear
  • Dual foot plates provide increased accuracy and dependability
  • Quick and Easy to Use for All Personnel
  • Direct Reading Analog Scale and Dual LED Go/No-Go Indicators

Shoe TesterSimply stand on the heavy-duty sandblasted aluminum foot plates and the SAFE-T-OHM® automatically measures the resistance of your ESD footwear. It provides an accurate direct readout on a full-range, color-coded scale and "Go/No-Go" status-at-a-glance with dual LED indicators which are calibrated at common ESD threshold levels. The Model M combines rugged design with solid-state technology tailored for the demands of the electronics industry where accurate, dependable static control monitoring is essential.


Power Requirements: 115 CVAC, 50/60 Hz
Protective Circuitry: UL approved Class II transformer, one megohm current limiting resistors in series with each shoe plate
Accuracy: ±1% at both minimum and maximum of range
Size and Weight: 12 x 17 inches (30.5x43.2 cm); 8 lb (3.5 kg)
Installation: Clean, dry, static-free floor. Carpeting not recommended

Power Cord
Shoe Plate Assembly
Previous Page