| |
Industrial Pressure Transmitter - Series
626 |
| 0.25% Accuracy, NEMA 4X Enclosure |
 The Dwyer Series 626 Pressure
Transmitter converts a single positive pressure into a
standard 4-20 mA output signal. The Series 626 can be used
to accurately measure compatible gases and liquids. Accuracy
is ±0.25% of full scale. Designed for industrial environments,
with its NEMA 4X (IP66) housing and 1/2" female NPT conduit
connection, this transmitter resists most effects of shock
and vibration. Independently adjustable zero and span controls
are provided, located inside the enclosure.
|
| |
| Specifications: |
| Service: Compatible gases or liquids |
| Wetted Materials: Type 316, 316LSS |
| Accuracty: ±0.25% full scale (includes linearity,
hysteresis, and repeatability). |
| Temperature Limit: 0 to 200°F (-18 to 93°C) |
| Compensated Temperature Range: 0 to 175°F (-18 to
79° C) |
| Thermal Effect: ±0.02% FS/°F (includes zero
and span) |
| Pressure Limits: See chart |
| Power Requirements: 13 to 35 VDC (2-wire) |
| Output Signal: 4 to 20 mA. |
| Zero and Span Adjustments: Accessible potentiometers |
| Response Time: 50 msec |
| Loop Resistance: 0 - 1300 ohms maximum |
| Current Consumption: 38 mA (max) |
| Electrical Connections: Terminal block; 1/2" female
NPT conduit |
| Process Connection: 1/4" male NPT (optional 1/4"
female NPT) |
| Enclosure Rating: NEMA 4X |
| Mountng Orientation: Mount in any position |
| Weight: 10 oz (283 g). |
| |
| Stock Models: |
| |
Pressure Ranges |
| Model Number |
Pressure Range |
Maximum Pressure |
Over Pressure |
| 626-07-CH-P1-E5-S1 |
0-15 PSI |
30 PSI |
150 PSI |
| 626-08-CH-P1-E5-S1 |
0-30 PSI |
60 PSI |
300 PSI |
| 626-09-CH-P1-E5-S1 |
0-50 PSI |
100 PSI |
300 PSI |
| 626-10-CH-P1-E5-S1 |
0-100 PSI |
200 PSI |
500 PSI |
| 626-12-CH-P1-E5-S1 |
0-200 PSI |
400 PSI |
1000 PSI |
| 626-13-CH-P1-E5-S1 |
0-300 PSI |
600 PSI |
1500 PSI |
| 626-14-CH-P1-E5-S1 |
0-500 PSI |
1000 PSI |
2500 PSI |
|
|
|
| |
| |
| Previous Page |
| |
