Dwyer Sales Department: 1-201-419-6111 ext. 26 for Sales Group  |  dwyer@nciweb.com


 

Dwyer Series PBLT2

Submersible Level Transmitter
Perfect for Sludge and Slurries, Lightning Protected - Available From Stock !
 

Model PBLT2PBLT2 and PBLTX Submersible Level Transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 SS diaphragm seal is non-clogging and damage resistant to floating solids.

The PBLT2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty). The PBLTX is UL approved intrinsically safe for use in hazardous locations when used with proper barrier.

Units comes equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer. See Dimensions

  • Excellent chemical compatibility with 316 construction and ETFE cable
  • Lightning and surge protection on PBLT2 models
  • Maintenance free vent filter
  • UL approved intrinsically safe on PBLTX models
  • Large diameter, non-clogging, damage resistant, 316 SS diaphragm seal
Model PBLT
Larger Image of PBLT2 Level Transmitter Larger Image of Wiring
 
SPECIFICATIONS
Service: Compatible liquids.
Wetted Materials: 316 SS, 316L SS, Buna-N, cable: ETFE or polyurethane.
Accuracy: ±0.25% full scale (includes linearity, hysteresis, and repeatability).
Temperature Limit: PBLT2: 0 to 200°F (-18 to 93°C), PBLTX: 0 to 176°F (- 18 to 80°C).
Compensated Temperature Range: PBLT2: 0 to 180°F (-18 to 82°C), PBLTX: 0 to 176°F (-18 to 80°C).
Thermal Effect: ±0.02% FS/°F.
Pressure Limit: 2X full scale.
Power Requirement: PBLT2: 13 to 30 VDC, PBLTX: 10 to 28 VDC.
Output Signal: 4 to 20 mA DC, two wire.
Response Time: 50 msec.
Loop Resistance: 900 ohms.
Electrical Connection: Wire pigtail.
Mounting Orientation: Suspended in tank below level being measured.
Weight: 4.3 lb (2.0 kg).
Electrical Protection: PBLT2: Lightning and surge protection, PBLTX: none.
Agency Approvals: PBLT2: None, PBLTX: CE, UL intrinsically safe for Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; Class III, Div. 1. (According to control drawing 01-700797-00).
 
ACCESORIES
  • MTL5041 Intrinsically Safe Galvanic Isolator.
  • MTL7706 Intrinsically Safe Zener Barrier.
Options:
  • Intrinsically Safe Approval - Change model number from PBLT2 to PBLTX.
  • Custom Ranges or Cable Lengths.
 
APPLICATIONS
Wastewater: sludge pits, clarifiers, digesters; Alum tanks; Chemical storage tanks; Oil tanks; Lime slurry; Sumps; Reservoirs
 
POPULAR MODELS - Submersible Level Transmitter
Model Number Description
 PBLT2-5-40 Submersible level transmitter, range 5 psi (11.54 ft wc) [3.52 m wc], 40 ft (12.2 m) ETFE cable.
 PBLT2-10-40 Submersible level transmitter, range 10 psi (23.09 ft wc) [7.04 m wc], 40 ft (12.2 m) ETFE cable.
 PBLT2-15-60 Submersible level transmitter, range 15 psi (34.63 ft wc) [10.56 m wc], 60 ft (18.3 m) ETFE cable.
 PBLT2-20-60 Submersible level transmitter, range 20 psi (46.18 ft wc) [14.08 m wc], 60 ft (18.3 m) ETFE cable.
 PBLT2-5-40-PU Submersible level transmitter, range 5 psi (11.54 ft wc) [3.52 m wc], 40 ft (12.2 m) polyurethane cable.
 PBLT2-10-40-PU Submersible level transmitter, range 10 psi (23.09 ft wc) [7.04 m wc], 40 ft (12.2 m) polyurethane cable.
 PBLT2-15-60-PU Submersible level transmitter, range 15 psi (34.63 ft wc) [10.56 m wc], 60 ft (18.3 m) polyurethane cable.
 PBLT2-20-60-PU Submersible level transmitter, range 20 psi (46.18 ft wc) [14.08 m wc], 60 ft (18.3 m) polyurethane cable.
 
POPULAR MODELS - Intrinsically Safe Submersible Level Transmitter
Model Number Description
 PBLTX-5-40 Intrinsically safe submersible level transmitter, range 5 psi (11.54 ft wc) [3.52 m wc], 40 ft (12.2 m) ETFE cable.
 PBLTX-10-40 Intrinsically safe submersible level transmitter, range 10 psi (23.09 ft wc) [7.04 m wc], 40 ft (12.2 m) ETFE cable.
 PBLTX-15-60 Intrinsically safe submersible level transmitter, range 15 psi (34.63 ft wc) [10.56 m wc], 60 ft (18.3 m) ETFE cable.
 PBLTX-20-60 Intrinsically safe submersible level transmitter, range 20 psi (46.18 ft wc) [14.08 m wc], 60 ft (18.3 m) ETFE cable.
 PBLTX-5-40-PU Intrinsically safe submersible level trans, range 5 psi (11.54 ft wc) [3.52 m wc], 40 ft (12.2 m) polyurethane cable.
 PBLTX-10-40-PU Intrinsically safe submersible level trans, range 10 psi (23.09 ft wc) [7.04 m wc], 40 ft (12.2 m) polyurethane cable.
 PBLTX-15-60-PU Intrinsically safe submersible level trans, range 15 psi (34.63 ft wc) [10.56 m wc], 60 ft (18.3 m) polyurethane cable.
 PBLTX-20-60-PU Intrinsically safe submersible level trans, range 20 psi (46.18 ft wc) [14.08 m wc], 60 ft (18.3 m) polyurethane cable.
 
Previous Page