| |
Series HFT In-Line
Flow Transmitter |
| Local Flow Indication, Unrestricted
Mounting, 4-20 mA, 0-5 V and 1-5 V Output |
| |
 The
Series HFT combines
a direct reading HF flowmeter with electronics to provide a proportional
analog output of 4-20 mA, 0-5 and 1-5 VDC. Use the output to
drive data acquisition devices, meters or analog input cards.
The entire assembly is housed in a rugged cast aluminum NEMA
4X enclosure. The unit can be installed in outdoor applications
or harsh environments where liquid tight seals are required.
The flow transmitter does not require input or output straight
plumbing, and can be mounted in any orientation. Dimensional
Information
APPLICATIONS
HFT Flow Transmitters can be used to set flow rates, fluid motor
and cylinder speeds. Check pump high pressure performance,
pressure relief valve settings, fluid handling systems, in
agricultural, construction or industrial machinery, power tools
and equipment. Monitor air with aluminum models; petrochemical
operations with brass or stainless steel models. |
| |
| SPECIFICATIONS |
Service: Compatible gases or liquids.
Wetted Materials:
Body: Aluminum, brass or 304 SS.
Seals: Buna-N or Viton®.
Magnet: Teflon® coated Alnico®.
Other Internal Parts: 304 SS.
Viscosity: 500 SSU.
Accuracy Measuring: ±4% FS over entire range; ±2.5% over
center third of the measuring range.
Repeatability: ±1% of full scale.
Response Time: <100 msec.
Output Signal: 4-20 mA; 0-5 V; 1-5 V.
Temperature Limits: 240°F (116°C).
Pressure Limits: Aluminum Body: 600 psig (41 bar); Brass Body: 3500 psig
(240 bar); 304 Stainless Steel Body: 6000 psig (413 bar).
Power Requirements: 12-35 VDC.
Enclosure Rating: NEMA 4X (IP65).
Shipping Weight: 1/4 to 1/2" female NPT Models: 3 lb (1.4 kg); 3/4 to
1" female NPT Models: 4.5 lb (2.0 kg); 1-1/2" female NPT Models: 12 lb (5.4 kg). |
| |
| Series HFT In-Line Flow Transmitters-Aluminum Body
for Air or Other Non-corrosive Gases: 600 psig (41 bar) |
| Model
Number |
Connection
Size |
Range,
Air, SCFM |
| HFT-1112 |
1/4" female NPT |
2-12 |
| HFT-1123 |
1/4" female NPT |
2-23 |
|
|
|
| |
| Series HFT In-Line Flow Transmitters-Brass Body for
Water Based Fluids (non-steam): 3500 psig (240 bar) |
| Model
Number |
Connection
Size |
Range,
Water, GPM (LPM) |
| HFT-2205 |
1/2" female NPT |
0.5-5.0 (1-19) |
| HFT-2315 |
3/4" female NPT |
2-15 (7.5-55) |
| HFT-2320 |
3/4" female NPT |
2-20 (7.5-75) |
| HFT-2435 |
1" female NPT |
5-35 (19-130) |
| HFT-2550 |
1-1/2" female NPT |
5-50 (19-189) |
|
|
|
| |
| Series HFT In-Line Flow Transmitters-304
Stainless Steel Body for High Pressure Fluids: 6000 psig (413 bar) |
| Model
Number |
Connection
Size |
Range,
Water, GPM (LPM) |
| HFT-3202 |
1/2" female NPT |
0.2-2.0 (0.75-7.5) |
| HFT-3210 |
1/2" female NPT |
0.5-10 (1.9-38) |
|
|
|
| |
| Previous Page |
| |
