| |
Series SCC Signal
Conditioner |
| ±0.05% Accuracy, 1500 VAC
Isolation, 3-Way |
| |
 The Series SCC Signal Conditioners provide
maximum accuracy with minimal cost. Built-in microprocessor digitally
scales, amplifies, linearizes and isolates thermocouple, RTD,
current, voltage, frequency or potentiometer analog input signals.
Units offer 16-bit input resolution with 0.05% full scale accuracy.
Eliminate ground loops with 1500 VAC isolation. Two LEDs, one
red and one green, located on the front face of the enclosure
provide visual indication of operation. Additional features include
short circuit, reverse power protection, digital calibration
and cold junction compensation.
Installation is a snap with the DIN rail mountable
enclosure. Units are factory set to support a specific analog
input and output, however, can be easily reconfigured to suit
your application with the user friendly Windows™ Configuration
software and cable (sold separately).
Also available is the SCC-4W DIN Rail Mountable
power supply and SCC-L1 Loop Isolator. Model SCC-4W is designed
specifically to provide 24 VDC power for the SCC modules. Model
SCC-L1 accepts a 4 to 20 mA signal and provides an isolated 4
to 20mA signal output. Dimensional Information |
| |
| SPECIFICATIONS |
Isolation: 1500 VAC. 3-way: C, V, TC; 2-way: RTD, POT,
FRQ, LI.
Input Protection: 220 VAC continuous.
Input Impedance: 1GΩ (mV/TC); >55KΩ (Voltage); 82Ω (Current).
Excitation: 150µA (RTD), 1.25V (POT).
Output Impedance: >10MΩ (Current); ~ 0Ω (Voltage).
Output Load: ≤600Ω (Current); ≥4KΩ (±10 Volts); ≥2KΩ (±5
Volts).
Power Requirements: 15-32 VDC @ 25-45 mA.
Over Voltage: 240 Vrms continuous.
Accuracy: 0.05% Full Scale (includes linearity, repeatability, and calibration
errors).
Cold Junction Compensation: ±0.02°C (-15 to 55°C) for
all T/C.
Resolution: 16-bit (input); 13-bit (output).
Drift: 0.01% Full Scale per °C.
Ambient Operating Temperature: Operating: -40 to 167°F (-40 to 75°C).
Storage Temperature: -49 to 185°F (-45 to 85°C); 0-95% RH, non-condensing.
Mounting: DIN rail (32 mm-G and 35 mm-H).
Connections: Socketed screw terminals for 14-22 AWG.
Response Time: 150 ms @ 60 Hz, typical.
Housing Material: Polyamide.
Weight: 1.4 oz (40 g).
Agency Approvals: CE, CSA, FM, cUL, UL.
|
| NOTE: Units can be reconfigured from their factory
(default) settings with the SCC-CC-A1 Windows™ Software (sold
separately). |
| |
| ACCESSORIES |
SCC-L1 - Loop
Isolator 4 to 20 mA Input and Output.
SCC-4W - Power Supply 85 to 265 VAC @ 50/60 Hz.
SCC-CC-A1 - Windows™ Software and Cable. |
| |
| Popular Models: |
Model
Number |
Input
Types and Ranges |
Default
Input Range |
Output
Types and Ranges |
Default
Output Range |
| SCC-C/C |
0-10 mA, 0-20 mA, 4-20 mA, ±10 mA, ±20
mA |
4-20 mA |
0-20 mA or 4-20 mA |
4-20 mA |
| SCC-C/V |
0-10 mA, 0-20 mA, 4-20 mA, ±10 mA, ±20
mA |
4-20 mA |
0-5 V, 0-10 V, ±5 V or ±10 V |
0-10 V |
| SCC-V/C |
0-5 V, 1-5 V, ±5 V, ±1.5 V, 0-1.5
V, 0-1.25 V, ±1.25 V, ±300 mV, 0-300
mV, ±10 mV, 0-10 mV, 0-50 mV, ±50 mV |
0-10 V |
0-20 mA or 4-20 mA |
4-20 mA |
| SCC-V/V |
0-5 V, 1-5 V, ±5 V, ±1.5 V, 0-1.5
V, 0-1.25 V, ±1.25 V, ±300m V, 0-300
mV, ±10 mV, 0-10 mV, 0-50 mV, ±50 mV |
0-10 V |
0-5 V, 1-5 V, 0-10 V, 2 V-10 V |
0-10 V |
| SCC-TC/C |
-148 to 1832°F, -328 to 32°F (Type E T/C),
32 to 1400°F, -328 to 32°F (Type J T/C),
-328 to 32°F, 32 to 2372°F (Type N T/C),
32 to 2498°F, -328 to 32°F (Type K T/C),
-256 to 752°F, 32 to 752°F (Type T T/C) |
Type J -32 to 1400°F |
0-20 mA or 4-20 mA |
4-20 mA |
| SCC-TC/V |
-148 to 1832°F, -328 to 32°F (Type E T/C),
32 to 1400°F, -328 to 32°F (Type J T/C),
-328 to 32°F, 32 to 2372°F (Type N T/C),
32 to 2498°F, -328 to 32°F (Type K T/C),
-256 to 752°F, 32 to 752°F (Type T T/C) |
Type J -32 to 1400°F |
0-5 V or 0-10 V |
0-10 V |
| SCC-RTD/C |
-328 to 1562°F (Pt100 ohm), -148 to 500°F
(Ni120 ohm), -148 to 500°F (Cu10 ohm), 0 to 500
ohm |
Pt100 -328 to 1562°F |
0-20 mA or 4-20 mA |
4-20 mA |
| SCC-RTD/V |
-328 to 1562°F (Pt100 ohm), -148 to 500°F
(Ni120 ohm), -148 to 500°F (Cu10 ohm), 0 to 500
ohm |
Pt100 -328 to 1562°F |
0-5 V or 0-10 V |
0-10 V |
| SCC-POT/C |
0-500 ohm (min.) or 0-100 kohm (max.) |
0-10 kohm |
0-20 mA or 4-20 mA |
4-20 mA |
| SCC-POT/V |
0-500 ohm (min.) or 0-100 kohm (max.) |
0-10 kohm |
±5 V, ±10 V, 0-5 V or 0-10 V, 1-5
V |
0-10 V |
| SCC-FRQ/C |
0-100 kHz at a Magnitude of 0-50 mV, 0-500 mV,
0-5 V, 0-50 V or 0-250 V |
0-10 kHz (24 VDC) |
0-20 mA or 4-20 mA |
4-20 mA |
| SCC-FRQ/V |
0-100 kHz at a Magnitude of 0-50 mV, 0-500 mV,
0-5 V, 0-50 V or 0-250 V |
0-10 kHz (24 VDC) |
0-5 V or 0-10 V |
0-10 V |
|
|
|
| |
| Previous
Page |
| |
|
