Contact Dwyer Sales Department: 1-201-419-6120  |  dwyer@nciweb.com


'); newWindow.document.write('
'); newWindow.document.write('Click screen to close'); newWindow.document.write('
'); newWindow.document.close(); newWindow.focus(); } } //-->
 

Series SC4380 Iso-Verter® II Signal Conditioning Module
Accepts Virtually all Standard Process Signals, Easy-to-Wire Surface Mount/DIN Rail Mount, Completely Isolated Input and Output Signals
 

The SC4380 Iso-Vector® II Signal Converter/Isolator completely isolates the input from the output and from ground. It accepts virtually all standard process signals as an input, and isolates and retransmits the signal in either the same units, or virtually any other standard process signal. The SC4380 can be field programmed for reverse or direct action and can receive and transmit single sided or bipolar signals. Easy to wire surface mount/DIN rail mount package makes installation easy. Easy front access to multi-turn zero and span adjustments makes calibration a snap.  Dimensional Information
 
SPECIFICATIONS
Isolation: 1500 VAC RMS.
Linearity: 0.1% of full scale.
Drift: ±0.02%/°C typical, ±0.05%/°C maximum.
Power Supply: 85 to 265 VDC/VAC 50 to 400 Hz.
Output Loads: Current: 600 ohms maximum; Voltage: 500 ohms minimum (20 mA maximum).
Input Characteristics: Voltage: 1 megohms impedance; Current: 10 ohms.
Case Size: 0.866" W x 2.950" H x 3.880" D (25.0 x 75.0 x 98.5 mm).
Mounting: Mounts on industry standard 35 mm DIN Rail (DIN EN50022-35).
 
 
Inputs Outputs
Currents Voltage Current Voltage
0 to 5 mA 0 to 100 mV 0 to 1 mA 0 to 1 V
0 to 10 mA 0 to 200 mV 0 to 5 mA 0 to 5 V
0 to 10 mA 0 to 500 mV 0 to 20 mA 0 to 10 V
0 to 20 mA 0 to 1 V 1 to 5 mA 1 to 5 V
0 to 50 mA 0 to 5 V 4 to 20 mA 2 to 10 V
0 to 100 mA 0 to 10 V    
1 to 5 mA 1 to 5 V    
4 to 20 mA 2 to 10 V    
10 to 50 mA      
 
Popular Models:
Model Number Description
 SC4380 Iso-Verter® II Signal Converter/Isolator
 
Previous Page