The Iso-Verter® II Isolator/Converter protects
electronic circuits by completely isolating the input and output
signals from each other and from ground. Both input and output
ranges are fully field selectable with easy to adjust switches.
With bipolar input selection and zero suppression, nearly any
standard input/output range combination is possible. Zero and
span adjustments are easily accessible on top of housing. Units
plug into universally available octal sockets for quick easy
installation. Industry standard "pin-out" wiring configuration
allows direct replacement of most competitive models. Order optional
481-0159 socket for new installations.
SPECIFICATIONS
Isolation: 1500 VAC. Linearity: 0.1% of full span. Drift: ±0.02%/°C typical; ±0.05%°C maximum. Ambient Operating Temperature: 32 to 131°F (0 to 55°C). Output Loads: Current: 600 ohms maximum; Voltage: 500 ohms minimum (20
mA maximum). Input Impedance: Current: 10 ohms; Voltage: 1 megohm. Power Supply: 85-265 VDC/VAC, 50-400 Hz. Case Size (including socket pins): 2-3/8" W x 3-7/16" H x 1-3/4" D (60.3
x 87.3 x 44.4 mm); Height is 2-7/8" (73 mm) above socket. Mounting: Industry standard octal socket.