|
 The
Dwyer Series 636 Pressure Transmitter is a low cost, fixed range,
stainless steel transmitter with ±0.30% accuracy. It
is designed to continuously measure pressure for years in
even the toughest environmental and media conditions. Select
from 4 ranges to 0-300 psig (0-20 bar) with choice of 4-20
mA output (Model 636) or 1-5 VDC output (Model 636LP). Transmitters
are explosion-proof, (FM approved) and meet NACE standards
for off-shore applications.
SPECIFICATIONS
Service: Liquid, gas or vapor.
Wetted Materials: 316L SS.
Fill Fluid: DC 200 Silicone (standard).
Accuracy: ±0.30% of calibrated span.
Stability: ±0.5% of upper range limit for six months.
Temperature Limits: Electronics (ambient): -40 to 140°F
(-40 to 60°C); Process interface: -40 to 212°F (-40
to 100°C).
Pressure Limits: 300% upper range limit.
Compensated Temperature Range: -20 to 180°F (-29 to 82°C).
Thermal Effect: (includes zero and span). Between -20 and 180°F
(-29 and 82°C). ±2.0% per 50°F (28°C).
Power Requirements: 12 to 30 VDC (636), 8 to 14 VDC (636LP),
reverse polarity protection.
Output Signal: 4 to 20 mA DC, limited to 30 mA DC (636), 1-5
VDC (636LP).
Zero and Span Adjustments: Null: 4.0 mA ±2% span (636),
1 VDC ±1% span (636LP); Span: 16.0 mA ±1% span
(636), 4 VDC ±1% span (636LP).
Loop Resistance: 900 ohms max. @ 30 V.
Electrical Connection: 3/4" female NPT 24" (61 cm),
22 AWG.
Process Connection: 1/2" female NPT.
Weight: 0.83 lb (374 g).
Suggested Specifications
Pressure transmitter body shall be 316 stainless
steel with fixed range and accuracy of ±0.30%. Unit shall
be FM approved, explosion-proof for Class I,II, III, Division
1, Groups B, C, D, E, F, G, for Hazardous Locations; indoor
and outdoor NEMA Type 4 Enclosure. Transmitter shall be Dwyer
Model No. 636____. |
