Blancett Flow Meters

The B2800 is a technologically advanced flow meter designed to be comprehensive, user-friendly, flexible and cost efficient. The microprocessor-based display comes pre-calibrated by the factory when purchased with a Blancett turbine flow meter, or it can easily be configured in the field. The B2800 can be utilized with nearly any flow sensor that outputs a low-amplitude AC signal, but when paired with a rugged, reliable Blancett turbine flow meter, dependable and accurate flow information will be provided for years to come.  Larger Image of Monitor

• Displays rate and/or total on a large 8-digit by 3/4" display
• User friendly front panel programming
• Six mounting options available: meter, remote, swivel, hand-held, panel or explosion-proof
• Standard model displays in four selectable units of measure • Advanced model offers eleven units and four selectable time intervals for measurement
• CSA Class 1, Division 1 approval

The Model 1100 turbine flow meter is designed to withstand the demands of the most rigorous flow measurement applications. Designed to maintain accuracy and mechanical integrity, its rugged 316 stainless steel construction ensures a long service life in severe operating environments. The Model 1100 meets a wide range of measurement requirements and integrates electronically with the Blancett B2800 Flow Monitor, K-Factor Scaler, or the F to I/F to V Intelligent Converter. Originally developed for the secondary oil recovery market. the Model 1100 is an ideal meter for nearly all liquid flow measurement on or off the oilfield.

• Accurate and repeatable flow measurement in ranges from 0.6 to 5,000 GPM (20 to 171,000 BPD)
• Installation in pipe sizes from 1/2" to 10"
• Available in NPT, BSP, Victaulic®, Flange, or Hose Barbed end connections
• NIST traceable calibration

The QuikSert turbine flow meter's durable stainless steel body incorporates a helical turbine with tungsten carbide shaft and bearings. The durability provides an efficient, long service life and a cost effective solution for your measurement requirements. The QuikSert's compact design requires less space in the flow line, allowing for easy installation and lower mechanical costs. QuikSert provides a local flow rate and volume totalization when used with the Blancett B2800. The QuikSert utilizes modified upstream and downstream flow straighteners for enhanced fluid dynamics.

• Accuracy of 1% of reading and repeatability of 0.1
• Temperatures up to 350 °F
• Working pressures up to 3700 PSI
• Easy installation, lower maintenance costs
• Unique design eliminates need for mating flanges
• NIST Traceable Calibration

FloClean 3-A sanitary turbine flow meter meets the requirements of 3-A Sanitary Standard number 28-03 and is recommended for use in clean out-of place (COP) and sanitize out-of place (SOP) environments. FloClean uses the most advanced polishing technology in a durable 316L stainless steel body and was developed for use in the food, beverage and pharmaceutical industries. FloClean provides a local flow rate and volume totalization when used with the Blancett B2800, as well as the ability to interface with a variety of PLCs and computers.

• Accuracy of 1% and repeatability of 0.1%
• Temperatures up to 300° F
• 0.03 to 400 GPM flow rates
• 3/4" to 2-1/2 sanitary end connections
• NIST Traceable Calibration

The CorExx in-line turbine flow meter's corrosive-resistant body is constructed of 316L stainless steel and Fluorosint®, making it usable in nearly all high temperature and high pressure chemical environments. The meter can be mounted horizontally or vertically with no effect on flow measurement accuracy. The smaller design of the CorrExx allows for installation in confined areas. ConrExx produces an AC sine wave signal proportional to its volumetric flow rate. In addition to the standard magnetic pickup output, the CorrExx offers optional amplified DC frequency and a 4-20mA analog signal.

• Accuracy of 1 % of reading and repeatability of 0.1
• Temperatures up to 300° F
• 0.5 to 4.0 GPM flow rates, with a maximum pressure of 5000 psi
• NIST Traceable Calibration

The B1750 positive displacement flow meter is designed to meet the accuracy requirements for applications that maintain low flow rates and high fluid viscosities. It allows for easy installation and a long service life with two housing materials available, high strength aluminum and stainless steel. There is no need for additional upstream or downstream straight run piping. The B1750 has an optional magnetic pickup that interfaces with the Blancett B2800, as well as a variety of other PLCs or PC data acquisition systems.

• Accuracy of 0.5% and repeatability of 0.1%
• Temperatures up to 400° F
• Three flow ranges available for each housing type
• Allows for bi-directional flow

The Model 1100 turbine meter repair kits are designed for use with Blancett turbines and those of other turbine meter manufacturers, particularly in the oil industry. They can be used in abrasive waterflood projects and hostile industrial environments, as well as conventional applications. All repair kits are factory calibrated and supplied with a unique k-factor for use within each turbine's standard flow range. When combined with the Blancett B2800 flow monitor, extended range calibrations are available for improved accuracy.

• Accuracy of 1.0% of reading and a repeatability of 0.1%
• Cost effective operation, installation requires no special tools
• Operating temperature up to 350° F

The Frequency to Current (F to I) and Frequency to Voltage (F to V) are active sensors designed to provide enhanced features and greater flexibility for Blancett turbine meters. These microprocessor-based devices measure and calculate the flow rate of a turbine flow meter and produce an analog output proportional to the flow rate.   Although the convertors are calibrated with the Blancett turbine meters when ordered, an optional Windows'" based software utility is available for reprogramming.

• Accuracy of frequency measurement is 1.0%
• Offered with either a 4-20mA or a 0-5 VDC output signal
• Ambient temperature up to 158° F

The K-Factor Scaler converts a low level frequency output (Blancett turbine flow meters) into a scaled square wave output signal which then translates into the desired units of measure. The output from the K-Factor Scaler can be recognized by almost any data collection device. The K-Factor scaler is available in an eight-rotary switch­selectable model and a programmable version that is precalibrated when ordered with a Blancett Series 1100 turbine meter.

• CSA certification for ordinary locations
• Operating temperature up to 158° F
• Windows® based software available for configuration of programmable scaler